Muting A Conference Call; Locking A Conference Call; Raising/Lowering Hands In A Conference Call - Cisco 7912 - TEKELEC Manual

Muting a Conference Call

Locking a Conference Call

Raising/Lowering Hands in a Conference Call

Cisco 7912 Telephone User Guide
620-05600350
Only the moderator of the meet-me conference call can mute (disable the ability to
speak in the conference) all parties in the meet-me conference call. The moderator
also has the ability to un-mute (restore conversation).
The Mute function is toggled from the keypad by pressing *5 to enable or disable
the mute function.
When Mute is in effect, the moderator can still speak to all members of the
conference, but members of the conference cannot heard. Also the moderator may
leave and re-join the muted conference, but will not be muted (i.e., the moderator
can still talk to conference members).
When a meet-me conference is muted, all parties in the conference hear an
announcement that the conference has been muted.
Once Mute is enabled (before or during the conference call), anyone joining the
active conference will be muted as soon as they are connected to the conference
call. Callers joining the conference when mute is in effect hear an announcement
that the conference is muted after the announcement that the conference is active.
Members of the conference will hear the join tone and the caller's name.
Locking a meet-me conference prevents additional callers from joining the
conference. Unlocking the conference allows additional callers to join the
conference.
The Lock function is toggled from the keypad by pressing *4 to enable or disable
the lock function.
When the moderator locksor unlocks a conference, only the moderator will hear an
announcement that the conference has been locked or unlocked.
Callers who try to join the conference when it is locked hear an announcement that
the conference is locked and they should contact the moderator for assistance.
NOTE: The moderator must be using the Meet-Me Moderator Floor Control application in
the Web Portal to see and acknowledge raised hands.
If you are a member of a meet-me conference you can ask to be recognized or
respond to a moderator's question by raising and lowering your hand - in a virtual
manner.
•
Press #8 to raise your hand
Joining a Meet-Me Conference
System Telephone Features 39