Selective Call Forward; Enabling/Disabling Selective Call Forward; Entering The Forwarding Destination Number - Cisco 7912 - TEKELEC Manual

Selective Call Forward

Selective Call Forward

Enabling/Disabling Selective Call Forward

Entering the Forwarding Destination Number

58 System Telephone Features
Selective Call Forward allows you to program your phone to send calls from a list
of telephone numbers to another telephone number. All calls from phones on the
list go to the same destination, which can be changed at any time.
To use this feature, you designate the forward destination and manage a list of
telephone numbers (internal or external) that are forwarded to that number when a
call with that caller ID appears at your telephone.
Selective Call Forward is managed through a menu of commands activated by
pressing digits on the phone keypad. The commands are:
•
1 - Enable/disable feature
•
2 - Enter the forward (destination) number
•
3 - ID (forward destination number)
•
4 - Add members (to list to be forwarded)
•
5 - List members (of list to be forwarded)
•
6 - Delete members (from list to be forwarded)
The display on your telephone will show the options for each menu level. For
example, if you press 6 to delete a number, the display will show:
"1=Num, 2=List, 3=Del All, *=Main Menu".
The FrameMaker system allows you to turn the Selective Call Forward feature on
and off (i.e., decide when calls from your list will be forwarded and when they will
ring at your telephone as usual). Disabling (turning off) the feature does not delete
the list of callers assigned for forwarding.
1. Press *63 or *83.
2. Press the Dial soft key or pickup the handset.
A voice prompt tells you whether Selective Call Forward is enabled or dis-
abled and then gives the menu choices.
3. Press 1 to enable Selective Call Forward if it is disabled or to disable the
feature if it is enabled.
4. Hang up.
1. Press *63 or *83.
2. Press the Dial soft key or pickup the handset.
Cisco 7912 Telephone User Guide
620-05600350