Deleting An Abbreviated Dial Code; Verifying An Abbreviated Dial Number; Anonymous Call Rejection; Enabling Anonymous Call Rejection - Cisco 7912 - TEKELEC Manual

Deleting an Abbreviated Dial Code

Verifying an Abbreviated Dial Number

Anonymous Call Rejection

Enabling Anonymous Call Rejection

Disabling Anonymous Call Rejection

Cisco 7912 Telephone User Guide
620-05600350
1. Press 75*.
2. Press the Dial soft key or pickup the handset.
A voice prompt will lead you through the remaining steps.
3. Press 1 to program (set) the Abbreviated Dial code (00-99).
4. Press the digits of the Abbreviated Dial code to delete followed by the # sign.
A confirmation message tells you: "No number was entered."
5. Program or verify another Abbreviated Dial code or hang up to exit.
1. Press 75*.
2. Press the Dial soft key or pickup the handset.
3. Press 2 to verify (check) an Abbreviated Dial code (00-99).
4. Press the Abbreviated Dial code you wish to verify.
The phone number you entered for this Abbreviated Dial number is repeated
back.
5. Program or verify another Abbreviated Dial code or hang up to exit.
When enabled, this feature rejects calls from callers who block the display of their
caller ID information.
1. Press *77 on the telephone keypad.
2. Press the Dial soft key or pickup the handset.
3. Hang up.
On any subsequent incoming call that provides no caller ID, the calling party gets
a message that the party they are calling does not accept anonymous calls.
1. Press *87 on the telephone keypad.
2. Press the Dial soft key or pickup the handset.
3. Hang up.
Deleting an Abbreviated Dial Code
System Telephone Features 15