Change The Priority Of The Spot Color Table - Konica Minolta bizhub PRESS C6000 User Manual

9.8

Change the Priority of the Spot Color Table

9.8 Change the Priority of the Spot Color Table
This section describes how to change the priority of the spot color table among the multiple spot color tables
of the same name (group) which are registered in the image controller.
To change the priority, use [Spot Color Table Management] screen.
The priority defines which spot color table is adopted to the spot color specified by the application.
1
Click [Table] on [Spot Color] screen.
[Spot Color Table Management] screen appears.
% Similar operation can be done when you select [File] menu - [Table].
2
From the tree view, select [Controller].
The list appears according to the selection.
% For detailed information on how to connect another controller, refer to page 14-2.
3
From the list, select the spot color table to change the priority.
% The list is displayed per group of the same [Table Name]. Within the group, tables are displayed in
order of priority.
% "*" mark is added after the name of the spot color table which was registered at factory shipping.
In addition, a red @ mark is added before the name of the spot color table which was registered at
factory shipping.
% When you reload the information of the image controller connected currently, select [File] menu -
[Reload].
4
Click
The position of the selected spot color table moves within the group of [Table Name].
% Click [Factory Default] when you want to reset the priority settings of the spot color table which was
registered at factory shipping. In this case, the priority of the spot color table created by user is not
changed.
5
Close [Spot Color Table Management] screen after changing the priority.
IC-601
or to change the position of the selected spot color table.
9
9-14