Launch Color Centro; Login - Konica Minolta bizhub PRESS C6000 User Manual

5.1

Launch Color Centro

5 Basic Information
This chapter describes launch procedure, exit procedure, and screens of Color Centro.
5.1 Launch Color Centro
This section describes how to launch Color Centro.
To use Color Centro, it is necessary to connect to the image controller. You cannot launch Color Centro with-
out connecting to the image controller.
By connecting to the image controller, Color Centro can acquire the information of the main body. You can
switch the connection when there are two or more image controllers.
5.1.1

Login

To launch Color Centro, login procedure is necessary first.
0 To login, the IP address and the port number are necessary. When the port number is unknown, confirm
the JSP settings of the image controller. (default: 30081)
0 Confirm that the image controller can communicate.
0 Color Centro is the Java Application. When the Java application is blocked by the firewall, [Windows
Security Alert] screen is displayed. In this case, select the option corresponding to your network envi-
ronment, and click [Allow access] to allow the communication by Java application on your network.
1
Select [Start] ->[All Programs] -> [KONICA MINOLTA] -> [Color Centro] -> [KONICA MINOLTA Color
Centro].
% Or double-click the short cut key on the Desktop screen.
[Login] screen and [Launcher] screen appears.
% [Launcher] screen is not available until login is completed.
2
Enter the IP address and the port number (30081 - 30090) of the image controller to which you want to
connect Color Centro into [Destination] of [Login] screen, and click [OK].
Color Centro launches, and [Launcher] becomes available.
% If the IP address is 192.168.0.1 and the port number is 30081, separate the IP address and the port
number with a colon, and enter "192.168.0.1:30081".
IC-601
5
5-2