Change The Profile Set Information - Konica Minolta bizhub PRESS C6000 User Manual

13.9 Profile Set Management
13.9.6

Change the Profile Set Information

1
Click [Profile Set] - [Edit] on Color Configuration Management screen.
[Color Centro Profiler] screen appears.
2
From the tree view and the list of [Management of the Existing Profile sets], select the Profile Set to
change the information.
% For detailed information on how to connect another controller, refer to page 14-2.
% When you reload the information of the image controller connected currently, select [View] menu -
[Reload]. Executing of reload discards the adjusted Profile Set when the Profile Set has not been
registered yet in the image controller. Register the settings before executing of reload, as required.
For how to register it, refer to page 13-10.
3
Click [Change Info].
[Change Profile Set Information] appears.
% When you select multiple Profile Sets, [Change Info] is not available.
% Similar operation can be done when you select [File] menu - [Change Info].
4
Edit [Profile Set Name] (within 96 one-byte alpha-numerical characters) and [Comment (Optional)] (with-
in 192 one-byte alpha-numerical characters) as required.
% You cannot change to the same name of the existed Profile Set in the image controller.
5
Click [OK].
The Profile Set information is changed.
% When there is the Profile Set with the same name, [Copy Profile Set] screen appears. In this case,
specify another Profile Set name and click [OK].
6
On [Color Centro Profiler] screen, from the [File] menu, select [Exit].
[Color Configuration Management] screen returns.
IC-601
13
13-51