Edit The Component Profile Of Profile Set - Konica Minolta bizhub PRESS C6000 User Manual

13.6

Edit the Component Profile of Profile Set

13.6 Edit the Component Profile of Profile Set
This section describes how to edit the component profile of Profile Set by launching Color Centro Profiler.
The wizard screen appears by launching Color Centro Profiler. Following the instructions of the screen, you
can edit the component profile of Profile Set.
The flow of the wizard is as follows;
Name and Destination Settings
The following buttons appear on the wizard screen. Use those as required.
- [Next]: Click this button when you go to the next screen after completing the setting of the displayed
current screen.
- [Back]: Click this button when you back to the previous screen.
- [Cancel]: Click this button when you cancel the operation.
- [Suspend the Operation]: This button appears when suspending and restarting of the operation are
available. Click this button when you want to suspend your operation temporarily and restart thereafter.
The setting you made can be saved to the file. For detailed information on how to suspend and restart
your operation, refer to page 14-5.
IC-601
Confirmation of Procedure
Profile Settings
Recalculation Setting
Color Conversion Setting
Entering Comment
Calculation
Confirmation of Result
Complete
* As required, you can create profiles.
Profile Creation
* Calculation is executed.
13
13-23