Konica Minolta bizhub PRESS C6000 User Manual page 246

13.8 Adjust the Color Conversions of Profile Set
3
From [Effective Range], select the effective range.
The color conversion result of the adjusted point is displayed on [Result] and [After adj.]. In addition, the
color of [Result] is displayed on the upper-left of the Sample Color (below the [Result]) and the color of
[After adj.] is displayed on the upper-right.
% When you select [Narrow], the result of adjustment has influence on the color range which includes
only the near colors to the input color.
% When you select [Wide], the result of adjustment has influence on the color range which includes
the colors which are away from the input color.
% When you select [Normal], it has influence on the middle range between [Narrow] and [Wide].
% You can specify [Effective Range] per adjustment point.
% The values displayed on [Result] and [After adj.] are the value to which Input curve and color con-
version table are applied. (Output curve is not applied to the curve yet.)
4
Enter the value into [Add. Value] to make the value of [After adj.] the target value.
% When you discard the setting of [Add. Value], click [Undo] of [Point Color Adjustment].
Edit the Existing Point Color
1
From [Adjustment Point], select the adjustment point (input color) to edit.
The input color is displayed on the lower of the Sample Color (below [Result]).
2
From [Effective Range], select the effective range.
The color conversion result of the adjusted point is displayed on [Result] and [After adj.]. In addition, the
color of [Result] is displayed on the upper-left of the Sample Color and the color of [After adj.] is dis-
played on the upper-right.
% When you select [Narrow], the result of adjustment has influence on the color range which includes
only the near colors to the input color.
% When you select [Wide], the result of adjustment has influence on the color range which includes
the colors which are away from the input color.
% When you select [Normal], it has influence on the middle range between [Narrow] and [Wide].
% You can specify [Effective Range] per adjustment point.
% The values displayed on [Result] and [After adj.] are the value to which Input curve and color con-
version table are applied. (Output curve is not applied to the curve yet.)
3
Enter the value into [Add. Value] to make the value of [After adj.] the target value.
% When you discard the setting of [Add. Value], click [Undo] of [Point Color Adjustment].
Delete the Existing Point Color
1
From [Adjustment Point], select the adjustment point (input color) to delete.
2
Click [Delete].
The selected adjustment point is deleted.
IC-601
13
13-44