Customize The Color Conversions - Konica Minolta bizhub PRESS C6000 User Manual

11.11 Create the CMYK-CMYK Device Link Profile
% When you click [Browse], go to Step 4.
% When you click [Create], go to the steps described from page 11-16 to page 11-20.
4
On the screen displayed by clicking [CMYK Target Profile] - [Browse], select the CMYK target profile
used and click [Open].
The selected CMYK target profile is displayed to [Selected Profile] of [CMYK Target Profile].
5
Click [Next].
The Customize Color Conversions screen appears.
% Go to the step described on page 11-63.

11.11.4 Customize the Color Conversions

On the Customize Color Conversions screen, you can set the rendering intent, the preserve mid-tone and
preserve solid.
1
From [CMYK-CMYK Conversion] - [Rendering Intent], select the rendering intent.
% [Relative Colorimetric] is the setting to execute color conversion regarding the paper color as com-
pletely white. The paper color parts are represented as colorlessness after color conversion.
% [Absolute Colorimetric] is the setting to execute color conversion maintaining the measurement val-
ue of the paper color. The paper color parts are represented with the color near the actual paper
color after color conversion. When you select [Absolute Colorimetric], [Preserve Mid-Tone] and [Pre-
serve Solid] are not available.
% When you make all contents of the setting on the screen the same content as recommended setting,
click [Undo].
2
When you set the preserve mid-tone for one color, check [Preserve Mid-Tone] of that color.
% [Preserve Mid-Tone] is a setting to recompose the color after the color conversion as the same one
color which has composed the color before the color conversion.
% The setting of [C], [M], [Y] and [K] is the setting for the color composed of C/M/Y/K only.
% The setting of [R] is the setting for the color composed of [M] and [Y].
% The setting of [G] is the setting for the color composed of [C] and [Y].
% The setting of [B] is the setting for the color composed of [C] and [M].
% In some cases, you can't set [Preserve Mid-Tone] and [Preserve Solid] at the same time.
3
When you set the preserve solid for one color, check [Preserve Solid] of that color.
% [Preserve Solid] is a setting to represent the solid part after the color conversion with the same color
which is used for the solid part before the color conversion.
% The setting of [C], [M], [Y], and [K] is the setting about the color composed of C/M/Y/K only,
% The setting of [R] is the setting for the color composed of [M] and [Y].
IC-601
11
11-63