Basic Operation Of [Calibration] Screen - Konica Minolta bizhub PRESS C6000 User Manual

7.1 Outline of Calibration
7.1.3

Basic operation of [Calibration] screen

This section describes basic operation of [Calibration] screen.
1
Select the calibration method.
% For detailed information on how to select the calibration method, refer topage 7-5.
2
Select the instrument.
% For detailed information on how to select the instrument, refer to page 7-6.
3
Print the measurement chart.
% For detailed information on how to print the measurement chart, refer to page 7-7.
4
Execute a chart measurement. If necessary, execute a remeasurement of the chart.
% For detailed information on how to execute the chart measurement, refer to page 7-8.
% For detailed information on how to execute the remeasurement of chart, refer to page 7-9.
5
Confirm the measurement result.
% For detailed information on how to confirm the measurement result, refer topage 7-10
6
Register the calibration data.
% For detailed information on how to save, refer to page 7-12.
7
If necessary, reset the [Calibration] screen.
% For detailed information on how to reset, refer to page 7-13.
IC-601
7
7-4