Re-Login On Connection Switching - Konica Minolta bizhub PRESS C6000 User Manual

14.1

Re-login on Connection Switching

14 Other Functions
14.1 Re-login on Connection Switching
When you connect to the image controller which is different from the image controller currently connected,
operate as follows;
0 When there are unregistered settings for the image controller connecting currently connected, register
those to the image controller or save those to the local/network computer, as required.
0 To login, the IP address and the port number are necessary. When the port number is unknown, confirm
the JSP settings of the image controller. (default: 30081)
0 Confirm that the image controller can communicate.
1
Select [File] menu - [Login] on the screen you are using.
When the system can not find any unregistered/unsaved information, [Login] screen appears.
% When you use the screen on which tree view is displayed, similar operation can be done by selecting
other image controller on the tree view.
% Similar operation can be done when you use [File]menu of [Launcher].
% While [Login] screen is displayed, [Launcher] screen is not available until login is completed.
2
Enter the IP address and the port number (30081 - 30090) of the image controller to which you want to
connect Color Centro into [Destination] of [Login] screen, and click [OK].
% If the IP address is 192.168.0.1 and the port number is 30081, separate the IP address and the port
number with a colon, and enter "192.168.0.1:30081".
% You can select the IP address and the port number which were used before, from [Current Destina-
tion]. The input number is kept even after exiting Color Centro.
% When you click [Cancel], the login process is canceled.
% When you click [Help], the [Help] screen appears.
% When there is unregistered/unsaved information on the current screen, or some screens are under
use, the confirmation message appears. In this case, click [OK] if you want to close all the screens.
When you want to register/save the unregistered/unsaved information to the image controller/com-
puter, select [Cancel] and redo Step 1 after necessary operations for registration/saving.
IC-601
14
14-2