8.8
Confirmation Print
8.8
Confirmation Print
This section describes how to execute confirmation print to confirm the result of tone curve adjustment.
This function is available only when [Hold(Cont..)] is selected on the [Sample Picture] screen in [Select Sam-
ple]. (This function is not available as of April 2011. )
1
Click [Confirmation Print] on the [Tone Curve Adjustment] screen.
[Confirmation Print] screen appears.
% Similar operation can be done when you select [File] menu - [Confirmation Print].
2
Specify [Paper Tray], and confirm [Paper Size] and [Original Orientation].
3
When you select the job in which multiple images are included, specify the page number in [Print Page]
to execute confirmation print.
% When you select a job which has only 1 single image, [Page No.] is "1" and you cannot change it.
% The confirmation print outputs only 1 page.
4
Check [Print before and after the adjustment], when you want to print the image before adjustment.
5
Click [OK].
Confirmation printing is executed.
% When you save the adjusted tone curve, go to the step described on page 8-19.
IC-601
8
8-18