7.7
Confirm Measurement Result
7.7
Confirm Measurement Result
All measurement results appear in the list of [Calibration] screen.
The list displays all measurement results, until the time when [Calibration] screen is closed or reset.
This section describes how to confirm the measurement result.
d
Reference
For detailed information on how to reset [Calibration] screen, refer to page 7-13.
To Confirm the Measurement Result Curve
1
Check [Display Mode] - [Measurement Result].
2
From the list, select the measurement result of which you want to display curve.
The selected measurement result is displayed on the curve view area.
% Go to the step described on page 7-12.
IC-601
7
7-10