Customize The Color Conversions - Konica Minolta bizhub PRESS C6000 User Manual

13.6 Edit the Component Profile of Profile Set
13.6.5

Customize the Color Conversions

When you have set to recalculate or replace the device link profile which was made on Color Centro Profiler,
set the color conversions on the Customize Color Conversions screen.
On the Customize Color Conversions screen, according to the setting on the Recalculate Profile Set screen,
you can set the rendering intent of CMYK-CMYK conversion, the preserve mid-tone / preserve solid of CMYK
object (CYMK image, CMYK graphic and CMYK text) and the rendering intent of RGB object (RGB image,
RGB graphic and RGB text).
0 You cannot set the rendering intent when you replace all objects with the device link profile which was
made / was not made on Color Centro Profiler.
1
From [CMYK-CMYK Conversion] - [Rendering Intent], select the rendering intent.
% [Relative Colorimetric] is the setting to execute color conversion regarding the paper color as com-
pletely white. The paper color parts are represented as colorlessness after color conversion.
% [Absolute Colorimetric] is the setting to execute color conversion maintaining the measurement val-
ue of the paper color. The paper color parts are represented with the color near the actual paper
color after color conversion. When you select [Absolute Colorimetric], [Preserve Mid-Tone] and [Pre-
serve Solid] are not available.
% When you make all contents of the setting on the screen the same content as recommended setting,
click [Undo].
2
For [CMYK Image], [CMYK Graphic] and [CMYK Text], when you set the preserve mid-tone for one
color, check [Preserve Mid-Tone] of that color.
% [Preserve Mid-Tone] is a setting to recompose the color after the color conversion as the same one
color which has composed the color before the color conversion.
% The setting of [C], [M], [Y] and [K] is the setting for the color composed of C/M/Y/K only.
% The setting of [R] is the setting for the color composed of [M] and [Y].
% The setting of [G] is the setting for the color composed of [C] and [Y].
% The setting of [B] is the setting for the color composed of [C] and [M].
% In some cases, you cannot set [Preserve Mid-Tone] and [Preserve Solid] at the same time.
3
For [CMYK Image], [CMYK Graphic] and [CMYK Text], when you set the preserve solid for one color,
check [Preserve Solid] of that color.
% [Preserve Solid] is a setting to represent the solid part after the color conversion with the same color
which is used for the solid part before the color conversion.
% The setting of [C], [M], [Y], and [K] is the setting about the color composed of C/M/Y/K only,
% The setting of [R] is the setting for the color composed of [M] and [Y].
% The setting of [G] is the setting for the color composed of [C] and [Y].
% The setting of [B] is the setting for the color composed of [C] and [M].
% In some cases, you cannot set [Preserve Mid-Tone] and [Preserve Solid] at the same time.
IC-601
13
13-28