Complete The Profile - Konica Minolta bizhub PRESS C6000 User Manual

11.9 Edit the RGB-CMYK Device Link Profile
5
To execute the adjustment of the profile curve, you can drag and move the beginning point/ending point
(at both ends of the profile curve) and adjustment points (added by the clicking on the profile curve).
% The selected adjustment point appears as a small red square.
% By clicking [Previous] or [Next], you can switch the point selection to the previous or the next.
% You can move the selected point by entering the coordinate values into the input boxes which are
on the center of vertical/horizontal axises.
% When you want to delete the added point, drag it to the adjacent point or drop it outside of the profile
curve area.
% When you want to reset the adjusted setting, click [Undo] of [Profile Curve Adjustment].
11.9.4

Complete the Profile

After completing calculation, the Complete Profile screen appears.
1
Click [Finish].
The wizard is completed.
Color Centro Profiler is closed to return to [Profile Management ] screen.
IC-601
11
11-53