11.8
Create the RGB-CMYK Device Link Profile
% When you click [Browse], go to Step 4.
% When you select [sRGB] or [AdobeRGB], go to Step 5.
4
On the screen displayed by clicking [RGB Source Profile] - [Browse], select the RGB source profile used
and click [Open].
The selected RGB source profile is displayed below [Other] of [RGB Source Profile].
5
Click [Next].
The Customize Color Conversions screen appears.
% Go to the step described on page 11-43.
11.8.4
Customize the Color Conversions
On the Customize Color Conversions screen, you can set the rendering intent.
1
From [RGB-CMYK Conversion] - [Rendering Intent], select the rendering intent.
% [Perceptual] is the setting to represent the color near to the color which is before conversion.
% [Saturation] is the setting to represent the color which maintains as much as possible the brightness
of the color which is before conversion.
% When you make all contents of the setting on the screen the same content as recommended setting,
click [Undo].
2
Click [Confirmation Print] for the test printing.
[Confirmation Print] screen appears.
3
Specify the setting of confirmation printing and click [Print].
IC-601
11
11-43