Konica Minolta bizhub PRESS C6000 User Manual page 195

12.1 Outline of Color Default Settings
Item
[RGB]
[CMYK]
[Other Settings]
[Register]
[Help]
Status bar
IC-601
[No Color Conversion]
[Use RGB-CMYK Device
Link Profile]
[Use RGB Source Profile]
[Rendering]
[RGB Simulation]
[No Color Conversion]
[Use CMYK-CMYK Device
Link Profile]
[Use CMYK Target Profile]
[Paper Simulation]
[Printer Profile]
[Paper Type Link]
[Tone Curve]
[Pure Black]
[Gray Replacement]
[Black Overprint]
[Composite Overprint]
[Use Spot Color]
[Use Alternative Color Con-
version]
Description
Appears when [RGB] tab is clicked. Select this
when the image controller doesn't execute the
color conversion for the RGB data or uses the em-
bedded RGB profile as default.
Appears when [RGB] tab is clicked. Select this
when you use the RGB-CMYK device link profile
as default. When you check, select the RGB-
CMYK device link profile for Image, Graphic, and
Text respectively.
Appears when [RGB] tab is clicked. Select this
when you use the RGB source profile as default.
When you check, select the RGB source profile.
Appears when [RGB] tab is clicked. Select the de-
fault rendering setting for Image, Graphic, and
Text respectively.
Appears when [RGB] tab is clicked. Check when
you use the RGB simulation as default.
Appears when [CMYK] tab is clicked. Select this to
use the embedded CMYK target profile as default.
Appears when [CMYK] tab is clicked. Select this
when you use the CMYK-CMYK device link profile
as default.
Appears when [CMYK] tab is clicked. Select this
when you use the CMYK target profile as default.
Appears when [CMYK] tab is clicked. Check when
you execute the Paper Simulation as default.
Appears when [Other Settings] tab is clicked.
Specifies the default printer profile.
Appears when [Other Settings] tab is clicked.
Check when you enable the paper type link as de-
fault.
Appears when [Other Settings] tab is clicked.
Specifies the default tone curve.
Appears when [Other Settings] tab is clicked.
Specifies whether to use the pure black or not.
Specifies the pure black setting.
Appears when [Other Settings] tab is clicked.
Check when you use the gray replacement as de-
fault.
Appears when [Other Settings] tab is clicked.
Check when you execute the black overprint as
default.
Appears when [Other Settings] tab is clicked.
Check when you execute the composite overprint
as default.
Appears when [Other Settings] tab is clicked.
Check when you use the spot color as default.
Appears when [Other Settings] tab is clicked.
Check when you execute the alternative color
conversion as default.
Registers the adjustment result in the image con-
troller.
Displays the Help of this screen.
Displays the IP address and the port number of
the image controller connected currently.
12
12-4