Rgb Source Profile Management; Copy From The Image Controller - Konica Minolta bizhub PRESS C6000 User Manual

11.2

RGB Source Profile Management

11.2 RGB Source Profile Management
This section describes how to copy, delete, reload, change table information, export, and import the RGB
source profile.
11.2.1

Copy from the Image Controller

You can make a duplication of the RGB source profile in the image controller, to the image controller.
1
Click [RGB Source Profile] on [Profile Management] screen.
% Similar operation can be done when you select [File] menu - [Profile Type] and select [RGB Source
Profile] from the displayed sub menu.
2
From the tree view, select [Controller].
The list appears according to the selection.
% For detailed information on how to connect another controller, refer to page 14-2.
3
From the list, select the RGB source profile to copy.
% When you reload the information of the image controller connected currently, select [File] menu -
[Reload].
4
Click [Copy].
[Change Table Information] screen appears.
% When you select the multiple RGB source profiles, [Copy] is not available.
% When a folder other than [Controller] is selected on the tree view, [Copy] is not available.
% Similar operation can be done when you select [File] menu - [Copy].
5
Specify [Saved Name] (within 31 one-byte alpha-numerical characters) and [Memo] (within 128 one-
byte alpha-numerical characters).
% You cannot save the RGB source profile of the same name with those in the image controller.
6
Click [OK].
The duplication of the RGB source profile is generated in the image controller.
IC-601
11
11-5