Edit The Cmyk -Cmyk Device Link Profile - Konica Minolta bizhub PRESS C6000 User Manual

11.12

Edit the CMYK -CMYK Device Link Profile

11.12 Edit the CMYK -CMYK Device Link Profile
This section describes how to edit the CMYK-CMYK device link profile by launching Color Centro Profiler.
Color Centro Profiler enables the measurement feedback, the adjustment of the point color per object and
the adjustment of the profile curve.
The wizard screen appears by launching Color Centro Profiler. Following the instructions of the screen, you
can edit the CMYK-CMYK device link profile.
The flow of the wizard is as follows;
Confirmation of Procedure
Name and Destination Settings
Measurement Feedback
Entering Comment
Calculation
Confirmation of Result
Complete
The following buttons appear on the wizard screen. Use those as required.
- [Next]: Click this button when you go to the next screen after completing the setting of the displayed
current screen.
- [Back]: Click this button when you back to the previous screen.
- [Cancel]: Click this button when you cancel the operation.
- [Suspend the Operation]: This button appears when suspending and restarting of the operation are
available. Click this button when you want to suspend your operation temporarily and restart thereafter.
The setting you made can be saved to the file. For detailed information on how to suspend and restart
your operation, refer to page 14-5.
IC-601
Task Selection
Confirmation of Procedure
Name and Destination Settings
Point Color/
Profile Curve Adjustment
Entering Comment
Calculation
Confirmation of Result
Complete
* According to task selection,
wizard branches.
* Calculation is executed.
11
11-71