Contents About this product ................... ii Trademarks and registered trademarks ............ii LICENSE ISSUES ..................... iii Introduction System requirements ............... 1-1 Compatible multifunctional products ..........1-1 Main features ..................1-2 Backing up (saving) ................ 1-2 Restoring (recovering) ..............1-2 Wizard operations (program in dialog format) ....... 1-2 Access limitations through auto protect ........
(recover) information on media installed in multifunctional prod- ucts (MFP) on the network. Trademarks and registered trademarks Trademark acknowledgements KONICA MINOLTA and the KONICA MINOLTA logo are either registered trademarks or trademarks of KONICA MINOLTA HOLDINGS, INC. ® ®...
LICENSE ISSUES The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org.
Page 6
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EX- PRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AU- THOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCI- DENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE...
Introduction Introduction System requirements The system requirements for the HDD Backup Utility are described below. Operating system Windows XP Professional (SP3 or later) Windows XP Professional x64 Edition (SP2 or later) Windows Vista Enterprise (SP2 or later)* Windows Vista Business (SP2 or later)* Windows Vista Ultimate (SP2 or later)* Windows 7 Enterprise (SP1 or later)* Windows 7 Professional (SP1 or later)*...
Introduction Main features Backing up (saving) Data on the media (data storage device) installed in the multifunctional prod- uct can be backed up onto your computer. Restoring (recovering) The backed up data can be restored (recovered) from your computer to the original media installed in the multifunctional product.
Introduction General operation The following operations must be performed in order to use the HDD Backup Utility to back up or restore the data for the multifunctional product. To back up or restore The HDD Backup Utility is an application used by administrators of multi- functional products.
Installing the HDD Backup Utility Installing the HDD Backup Utility Installing Install the HDD Backup Utility onto your computer. Note Before installing the utility, be sure to log in with Administrator privileges. When the Device Set-up is not installed, the Device Set-up installer is ac- tivated.
Starting up the HDD Backup Utility Starting up the HDD Backup Utility To start up the HDD Backup Utility From the Windows [Start] menu, start the HDD Backup Utility. – Click the Windows [Start], point to [All Programs], then [KONICA MINOLTA], and then click [HDD Backup Utility] - [HDD Backup Util- ity].
Starting up the HDD Backup Utility Exiting the HDD Backup Utility Follow the procedure described below to exit the HDD Backup Utility. - In the main window, click [Exit] on the [File] menu. - In the main window, click the button with the “x” at the upper right of the window/dialog box.
Registering the multifunctional product to be backed up Registering the multifunctional product to be backed up When using the HDD Backup Utility, it is necessary to make a search for a supported device on the network for registration. As a method for the search/registration of a supported device, the following are available.
Backing up Backing up Data on the media (data storage device) installed in the multifunctional prod- uct can be backed up onto your computer. The backup operation is performed after the Backup wizard is started and the necessary settings have been specified. Note Only auxiliary data storage devices connected directly to your computer can be selected to store the backup data.
Page 15
Backing up Reminder While the backup operation is being performed, the control panel of the multifunctional product is locked and cannot be used. In addition, the multifunctional product will automatically be restarted when the backup operation is finished. Reminder If the firmware of the multifunctional product has been changed, then it may not be possible to restore to the changed multifunctional product backup data that has been created using the previous firmware.
Backing up To use the Backup wizard Before using the Backup wizard, check for the following. 0 Windows is logged on to with Administrator privileges. 0 The administrator password for the multifunctional product to be backed up is available. 0 The amount of space available on the auxiliary data storage device where the backup data is to be saved is greater than the maximum amount of space on the media to be backed up.
Page 17
Backing up Click [Next]. – Enter the administrator password as necessary. Select the backup type and media, and click [Next]. – The "Backup Box" or "Backup Image" type may not be selected depending on a device. HDD Backup Utility...
Page 18
Backing up Specify the location into which the backup files are saved and the fold- er name, and then click [Next]. – Click [Browse] to specify the location into which the backup files are saved. – Data can only be backed up on auxiliary data storage devices con- nected directly to your computer.
Page 19
Backing up When setting a password for the backup files, put a check mark at [Set a password for the backup files] to set a password and then click [Next]. – Be careful not to lose the password that is specified. If the pass- word is lost, the data cannot be restored.
Page 20
Backing up – To change the specified settings, click the [Back], and then specify the settings again. – If the [Cancel] is clicked to cancel the backup operation before it has been completed, all partially created backup data is erased. Click the [Finish].
Restoring Restoring The data backed up from the media in the multifunctional product can be re- stored (recovered) to the multifunctional product from your computer. The restoration operation is performed after the Restore wizard is started and the necessary settings have been specified. Reminder Data can only be restored to the multifunctional product specified during the backup operation.
Page 22
Restoring Note The multifunctional product will automatically be restarted when the res- toration operation is finished. Reminder If the firmware of the multifunctional product has been changed, then it may not be possible to restore to the changed multifunctional product backup data that has been created using the previous firmware.
Restoring To use the Restore wizard Before using the Restore wizard, check for the following. 0 Windows is logged on to with Administrator privileges. 0 The administrator password for the multifunctional product whose data is to be restored is available. 0 The multifunctional product to be restored is not being operated.
Page 24
Restoring Click the [Browse], and then select the data to be restored. If a password has been set for the selected data, enter the password, and click [OK]. Click [Next]. HDD Backup Utility...
Page 25
Restoring Enter the administrator password and click [Next]. Check the specified settings, and then click [Start]. HDD Backup Utility...
Page 26
Restoring When the confirmation message is displayed, click [OK]. Click the [Finish]. – If the [View Report] is clicked, the report file is displayed (in text for- mat) so that the details of the restoration can be checked. The Restore wizard closes, and the main window is displayed again. This completes the restoration operation.
Other Settings Other Settings For the HDD Backup Utility, the change of the following settings can be made in the HDD Backup Management Option screen. HDD Backup Management Option Selecting [Option]-[HDD Backup Management Option] from the [Tool] menu in the Main window displays the screen as shown below. Item Name Description Report file folder...
Error message list Error message list An error message may appear while HDD Backup Utility is being used. An error code appears after the message describing the error. The corrective measures for the various error codes are described below. Follow the described procedure. Error Code Number Remedy 101-102...
Page 29
Error message list Error Code Number Remedy 1000-8799 Communication with the device was not performed proper- ly. Wait a while, and then try again. 401-403, 405-406, 409, 411-412, The operation was not performed properly. Try again. 415, 501-503, 505, 507, 515-529, 531-536, 542, 548-553, 555-556, 558-559, 561, 606-609, 613-614, 616-623, 626-638, 704-706, 801,...