Cannot Adjust Color - Konica Minolta bizhub PRESS C6000 User Manual

15.2

Cannot Adjust Color

15.2 Cannot Adjust Color
Problem
Cannot print with the adjusted
color conversion
Cannot measure informed with
a message, ''BAR or MARK is
not found'', at a measurement
with an instrument.
IC-601
Possible Cause
When printing from the applica-
tion which has the color man-
agement function such as
Adobe Reader9, the application
might execute another color
conversion.
There may be problem on rec-
ognizing the bar (black bold line)
or the mark (diamond mark at
right and left) on the chart.
Remedy
Print after enabling "Color man-
agement by the printer" on each
application. For detailed informa-
tion on how to change the color
setting in each application, refer
to help and the manual etc. of
each application.
Confirm the manual of the meas-
urement instrument. A dotted line
for the cutout on the chart might
be a cause of the recognition er-
ror of the measurement instru-
ment. When you cut the chart
along and slightly inside the dot-
ted line, normal recognition might
be done.
15
15-3