[Basic Setting] Screen - Konica Minolta bizhub PRESS C6000 User Manual

6.3 Job Operation in the Image Controller (Image Controller Hold)

[Basic Setting] screen

Function
[Original Size]
[Use Paper Profile]
[Paper Profile]
[Paper Size]
[Full Bleed]
[Feed Direction]
[Paper Tray]
[Number of Copies]
IC-601
Description
It displays the original size and orientation for the job.
You can specify whether to use the paper profile or not.
Select the paper profile to use.
[Paper Size] and [Feed Direction] are automatically changed to the
setting values for the selected paper profile.
You can specify the paper size.
To use the custom size, register the paper size in [Custom Size Set-
tings] and select the registered paper size from the [Paper Size] list.
Refer to page 6-23 for more detailed information on how to register
the paper size.
• The custom size is displayed in the paper size list in [Per Page
Setting] and [Perfect Binding Settings].
Check this to print with no margins. This is available if the paper size
is wider than the original size at least 5 mm in width and height.
You can specify the feed direction.
You can specify the paper tray to use.
Once the paper tray is specified, [Paper Size] and [Feed Direction]
are automatically changed to the values set in the [Tray Settings]
screen.
This is disabled if the paper profile is specified.
You can specify the number of copies.
6
Custom size for the
current job
Custom size list in
Job Centro
6-21