Juniper JUNOSE 11.2.X IP SERVICES Configuration Manual page 225

show l2c discovery-table
Copyright © 2010, Juniper Networks, Inc.
Wait-for-gsmp-syn: Enable
gsmp-syn-timeout: 18 seconds
Use to display ANCP discovery table entries.
Use the optional delta keyword to display baseline statistics.
Field descriptions
Neighbor—Neighbor name
Access-Loop-Id—Access loop identifier
Down/Upstream (kbps)—Downstream and upstream rates, in Kbps
State—State of the access loop, UP or DOWN
Actual-Data-Rate-Upstream—Actual upstream data rate, in Kbps
Actual-Data-Rate-Downstream—Actual downstream data rate, in Kbps
Attainable-Data-Rate-Upstream—Attainable upstream data rate for this line, in
Kbps
Attainable-Data-Rate-Downstream—Attainable downstream data rate for this line,
in Kbps
Line-State—State of the access loop (SHOWTIME or IDLE)
Dsl-Type—Type of DSL
Total Line Attributes—Total number of line attributes reported
Example 1
host1# show l2c discovery-table brief
Neighbor
--------------- ------------------------------ ------------------- -----
ACCESSNODE_10 Accessnode_10 atm 2/2:0.0
ACCESSNODE_10 Accessnode_10 atm 2/32:0.0
ACCESSNODE_10 Accessnode_10 atm 2/33:0.0
ACCESSNODE_10 Accessnode_10 atm 2/34:0.0
Example 2—Topology discovery table for a particular end-user-id
host1#
show l2c discovery-table end-user-id "Accessnode_10 atm
2/3:0.0"Access-Loop-Id: Dslam_10 atm 2/3:0.0
Neighbor: ACCESSNODE_10
Actual-Data-Rate-Upstream: 1152(kbps)
Actual-Data-Rate-Downstream: 8064(kbps)
Attainable-Data-Rate-Upstream: 1176(kbps)
Attainable-Data-Rate-Downstream: 9376(kbps)
Line-State: 1(SHOWTIME)
Dsl-Type: 0(Invalid transmission type)
Total Line Attributes: 6
Access-Loop-Id Down/UpStream(kbps) State
8064/1184
8064/1184
8064/1184
8064/1184
Chapter 7: Configuring ANCP
UP
UP
DOWN
DOWN
UP
199