Table of Contents
Advertisement
match route-type
match-set summary prefix-tree
match tag
route-map
Copyright © 2010, Juniper Networks, Inc.
Use to match a route for the specified route type.
Example
host1(config-route-map)#match route-type level-1
Use the no version to delete the match clause from a route map or a specified value
from the match clause.
See match route-type.
Use to specify the prefix tree that summarizes routes for a particular route map.
Use the ip prefix-tree command to set the conditions of the prefix tree, including which
routes to summarize and how many bits of the network address to preserve.
Example
host1(config-route-map)#match-set summary prefix-tree boston
Use the no version to disable the use of the prefix tree by the route map.
See match-set summary prefix-tree.
Use to match the tag value of the destination routing protocol.
Example
host1(config)#route-map 1
host1(config-route-map)#match tag 25
Use the no version to delete the match clause from a route map or a specified value
from the match clause.
See match tag.
Use to define the conditions for redistributing routes from one routing protocol to
another, and for filtering or modifying updates sent to or received from peers.
Each route-map command has a list of match and set commands associated with it.
That is, the route map itself consists of a set of clauses; each clause (also called an
entry) consists of a match or set command:
match commands specify the match criteria, the conditions under which redistribution
is allowed for the current route map.
set commands specify the set actions, the redistribution actions to perform if the
criteria enforced by the match commands is met.
You can specify match and set clauses to modify attributes of redistributed routes.
Use route maps when you want to have detailed control over how routes are
redistributed between routing processes.
Chapter 1: Configuring Routing Policy
13
Advertisement
Table of Contents
