Juniper JUNOSE 11.2.X IP SERVICES Configuration Manual page 228

JunosE 11.2.x IP Services Configuration Guide
202
Topology Discovery—Whether topology discovery is enabled (true) or disabled
(false)
Maximum Discovery Entries—Maximum number of discovery table entries allowed
Ip address—IP address of the neighbor
TCP port—TCP port associated with this neighbor
Connection Time—Date and time at which this neighbor was connected
Add Branches Sent—Number of add branch messages sent to this neighbor
Delete Branches Sent—Number of delete branch messages sent to this neighbor
Line-configurations—Number of line configurations sent to this neighbor
OAM Loopback Requests Sent—Number of OAM loopback requests sent to this
neighbor
OAM Loopback Responses Received—Number of OAM loopback responses received
from this neighbor
Protocol State—Protocol state of this neighbor
Number of configured neighbors—Number of configured ANCP neighbors
Number of Neighbors in GSMP_ESTAB state—Number of ANCP neighbors that are
in an established GSMP state
Number of neighbors in GSMP_EMPTY state—Number of ANCP neighbors that are
in an unestablished GSMP state
Example 1
host1#show l2c neighbor name accessnode_1002
Neighbor Name: accessnode_1002
Neighbor Id: 0abc.0abc.1002
Maximum Branches: 10
Topology Discovery: true
Maximum Discovery Entries: 10000
Ip address: 1.1.1.2
TCP port: 1025
Connection Time: 03/02/2006 11:06:16
Add Branches Sent: 0
Delete Branches Sent: 0
Line-configurations: 0
OAM Loopback Requests Sent: 0
OAM Loopback Responses Received: 0
Protocol State: GSMP_ESTAB
Example 2
host1#show l2c neighbor brief
Name
-------------------- ---------------- ---------------- ----------------
accessnode1
Mac Address Remote Address
0abc.0abc.0abc null
Copyright © 2010, Juniper Networks, Inc.
Protocol State
EMPTY