Juniper JUNOSE 11.2.X IP SERVICES Configuration Manual page 247

For e series broadband services routers - ip services configuration
Table of Contents

Advertisement

enrollment url
ipsec ca authenticate
ipsec ca enroll
Copyright © 2010, Juniper Networks, Inc.
host1(config-ca-identity)#enrollment retry-period 40
Use the no version to restore the default, 1 minute.
See enrollment retry-period.
Use to specify the URL of the SCEP server, in the format http://server_ipaddress. You
can then use the ipsec ca authentication command to retrieve CA certificates from
the SCEP server, and the ipsec ca enroll command to retrieve the router's public key
certificates from the server.
Example
host1(config-ca-identity)#enrollment url http://192.168.99.105/scepurl
Use the no version to delete the enrollment URL specification.
See enrollment url.
Use to retrieve the specified CA's certificate. If authentication is successful, the
fingerprint is sent, and an ikeEnrollment message is logged at severity info.
The CA must be previously declared by the ipsec ca identity command.
Example
host1(config)#ipsec ca authenticate trustedca1
host1(config)#INFO 10/18/2003 03:45:16 ikeEnrollment (): Received CA certificate for
ca:trustedca1
INFO 10/18/2003 03:45:16 ikeEnrollment (): Received CA certificate for ca:trustedca1
fingerprint:28:19:ba:76:d8:e0:bb:22:60:cd:b9:2d:dc:b8:58:01
host1(config)#
Use the no ipsec ca identity command for the specified CA, or boot the router using
the factory defaults to remove the CA certificate that was generated during the online
configuration.
There is no no version.
See ipsec ca authenticate.
Use to enroll with the specified CA and to retrieve the router's public key certificate
during online digital certificate configuration. If enrollment is successful, the CA sends
the certificate to the router and logs an ikeEnrollment message is logged at severity
info.
Use the password option, if required by the CA, to access the CA and enable enrollment.
The CA must be previously declared by the ipsec ca identity command.
Example
host1(config)#ipsec ca enroll trustedca1 My498pWd
host1(config)#INFO 10/18/2003 03:49:33 ikeEnrollment (): Received erx certificate for
ca:trustedca1
Chapter 8: Configuring Digital Certificates
221

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.2.x

Table of Contents