Juniper JUNOSE 11.2.X IP SERVICES Configuration Manual page 82

For e series broadband services routers - ip services configuration
Table of Contents

Advertisement

JunosE 11.2.x IP Services Configuration Guide
show ip traffic
56
10.2.1.0/24
192.168.1.1
172.31.1.48/32
172.18.2.2
See show ip static.
Use to display statistics about IP traffic.
Field descriptions
IP Statistics Rcvd:
Router Id—Router ID number
total—Number of frames received
local destination—Frames with this router as their destination
hdr errors—Number of packets received that contain header errors
addr errors—Number of packets received that contain addressing errors
unkn proto—Number of packets received that contain unknown protocols
discards—Number of discarded packets
IP Statistics Frags:
reassembled—Number of reassembled packets
reasm timed out—Number of reassembled packets that timed out
reasm req—Number of requests for reassembly
reasm fails—Number of reassembly failures
frag ok—Number of fragmented packets reassembled successfully
frag fail—Number of fragmented packets reassembled unsuccessfully
frag creates—Number of packets created by fragmentation
IP Statistics Sent:
forwarded—Number of packets forwarded
generated—Number of packets generated
out disc—Number of outbound packets discarded
no routes—Number of packets that could not be routed
routing discards—Number of packets that could not be routed that were discarded
IP Statistics Route:
1
1
1
ethernet6/0
1
1
0
atm5/1.1
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.2.x

Table of Contents