JunosE 11.2.x IP Services Configuration Guide
clear ipv6 bfd session
Monitoring BFD
System Event Logs
114
host1#clear bfd session discriminator 4
There is no no version.
See clear bfd session.
NOTE: When the clear bfd session command is executed, the BFD sessions move to
the Admin Down state before restarting the BFD sessions so that the client applications
are not impacted.
Use to restart all IPv6 BFD sessions or a specified IPv6 BFD session.
Use the address keyword to indicate the IPv6 address of the destination to which the
session has been established.
Example 1
host1#clear ipv6 bfd session
Example 2
host1#clear ipv6 bfd session address 1::4
There is no no version.
See clear ipv6 bfd session.
This section lists the system event logs associated with the BFD protocol and describes
the show commands you can use to view BFD-related information.
To troubleshoot and monitor BFD, use the following system event logs:
bfdGeneral
bfdSession
bfdEvents
bgpConnections
isisBfdEvents
ospfEvents
ospfv3General
ripBfdLog
For more information about using event logs, see the JunosE System Event Logging
Reference Guide.
Copyright © 2010, Juniper Networks, Inc.