Juniper JUNOSE 11.2.X IP SERVICES Configuration Manual page 340

JunosE 11.2.x IP Services Configuration Guide
show ip mobile home-agent
show ip mobile host
314
Lifetime remaining—Remaining interval, in hh:mm:sec format, at which the registration
request exceeds the home agent configured time
Tunnel—Configuration information provided while setting up the tunnel between
the foreign agent and the home agent
Reverse tunnel—Whether reverse tunneling is enabled or disabled
Example
host1#show ip mobile binding
MN-NAI: jr@zoom.com
AAA-NAI: user@zoom.com
Home IP address:
Home agent address:
Care-of-address:
Lifetime granted :
Lifetime remaining :
Tunnel: Source
GRE
Reverse tunnel: enabled
See show ip mobile binding.
Use to display the configuration information of the home agent in the virtual router.
Field descriptions
Access list name—Name of the access control list applied to the care-of address
that restricts access for foreign agents or networks
Registration lifetime (in seconds)—Number of seconds before which the registration
requests are established
Replay protection time (in seconds)—Number of seconds before which a registration
request can exceed the home agent configured time value
Reverse tunnel—Whether reverse tunneling is enabled or disabled
Example
host1#show ip mobile home-agent
Home Agent Parameters
Access list name
Registration lifetime
Replay protection time
Reverse tunnel
See show ip mobile home-agent.
Use to display configuration of all or specified mobile nodes or domain users.
Field descriptions
55.0.0.5
66.0.0.5
72.1.1.15
10:00:00 (36000 seconds)
01:46:32
66.0.0.5, Destination 72.1.1.15,
---
(in seconds) 36000
(in seconds) 7
enabled
Copyright © 2010, Juniper Networks, Inc.
Encapsulation