Juniper JUNOSE 11.2.X IP SERVICES Configuration Manual page 126

JunosE 11.2.x IP Services Configuration Guide
cache timeout
enabled
export destination
export source
ip flow-aggregation cache
100
host1(config-flow-cache)#cache entries 524288
Use the no version to reset the number of entries to the default value 4096.
See cache entries.
Use to set the active and inactive timers.
Example
host1(config-flow-cache)#cache timeout active 50
Use the no version to reset the default value.
See cache timeout.
Use to enable the aggregation cache to accumulate information form the flow cache.
Example
host1(config-flow-cache)#enabled
Use the no version to stop the information flow from the flow cache.
See enabled.
Use to configure an export destination for the aggregation cache.
Example
host1(config-flow-cache)#export destination myhost udp-port
Use the no version to remove the destination.
See export destination.
Use to configure an export source for the aggregation cache.
Example
host1(config-flow-cache)#export source interface inf1
Use the no version to remove the destination.
See export source.
Use to create an aggregation cache.
Example
host1(config)#ip flow-aggregation cache
Use the no version to remove the aggregation cache and its configuration.
See ip flow-aggregation cache.
Copyright © 2010, Juniper Networks, Inc.