Juniper JUNOSE 11.2.X IP SERVICES Configuration Manual page 81

show ip static
Copyright © 2010, Juniper Networks, Inc.
Interface—Interface type and specifier associated with the IP address; displays "
Local Interface" if a special interface index is present in the routing table for special
IP addresses, such as broadcast addresses
Next Hop—Next hop to reach the IP address; displays " ---" if no next hop is associated
with the IP address
Example 1
host1#show ip route slot 6 10.10.0.231
IP address Interface
------------ ----------------
10.10.0.231 fastEthernet 6/0
Example 2
host1#show ip route slot 9 90.248.1.2
IP address Interface
------------ ----------------
90.248.1.2 serial9/23:2
Example 3
host1#show ip route slot 9 90.249.255.255
IP address Interface
------------ ----------------
90.249.255.255 Local Interface
See show ip route slot.
Use to display the status of static routes in the routing table.
You can specify an optional IP mask that filters specific routes.
Field descriptions
Prefix—IP address prefix
Length—Prefix length
Next Hop—IP address of the next hop
Met—Number of hops
Dist—Administrative distance or weight assigned to the route
Tag—Tag value assigned to the route
Intf—Interface type and interface specifier
Example
host1#show ip static
Prefix/Length Next Hop:
10.2.0.0/24 192.168.1.1
Chapter 1: Configuring Routing Policy
Next Hop
------------
10.10.0.231
Next Hop
------------
---
Next Hop
------------
---
Met: Dist: Tag: Intf:
1 1 0 ethernet6/0
55