Changes In Default Behavior And Syntax In Junos Release 10.1 For M Series, Mx Series, And T Series Routers; Class Of Service; Forwarding And Sampling; Interfaces And Chassis - Juniper JUNOS 10.1 - RELEASE NOTES REV 4 Release Note

JUNOS 10.1 Software Release Notes
Changes in Default Behavior and Syntax in JUNOS Release 10.1 for M Series, MX Series,
and T Series Routers

Class of Service

Forwarding and Sampling

Interfaces and Chassis

42

Changes in Default Behavior and Syntax in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers

Forwarding class to queue number maps not supported on Multiservices link
services intelligent queuing (LSQ) interfaces If you configure a forwarding
class map associating a forwarding class with a queue number, these maps are
not supported on Multiservices link services intelligent queuing (
[Class of Service]
Enhancement to the show firewall
supports a option that enables you to display only the names of firewall
terse
filters. This option displays no other information about the firewall filters
configured on your system. Use the
all the correct filters are installed.
[Routing Protocols and Policies Command Reference]
Disabling MAC address learning of neighbors through ARP or neighbor
discovery for IPv4 and IPv6 traffic for logical interfaces The JUNOS Software
provides the no-neighbor-learn
interface-name unit interface-unit-number family inet]
interface-name unit interface-unit-number family inet6]
To disable ARP address learning for IPv4 traffic for a logical interface, include
the statement at the
no-neighbor-learn
interface-unit-number family inet
[edit interfaces interface-name unit interface-unit-number family inet]
no-neighbor-learn;
To disable neighbor discovery for IPv6 traffic for a logical interface, include the
no-neighbor-learn statement at the
logical-unit-number family inet6
[edit interfaces interface-name unit interface-unit-number family inet6]
no-neighbor-learn;
[System Basics]
Logical and physical Ethernet interface bandwidth If you configure a
bandwidth on a logical Ethernet interface greater than the bandwidth configured
for the corresponding physical Ethernet interface, the commit fails. The bandwidth
of the logical interface should always be less than the bandwidth of the physical
command The show firewall
show firewall terse
configuration statement at the
and
hierarchy levels.
[edit interfaces interface-name unit
] hierarchy level:
[edit interface interface-name unit
] hierarchy level:
) interfaces.
lsq-
command now
command to verify that
[edit interfaces
[edit interfaces