Chassis Cluster - Juniper JUNOS 10.1 - RELEASE NOTES REV 4 Release Note

JUNOS 10.1 Software Release Notes

Chassis Cluster

124
Changes In Default Behavior and Syntax in JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services
Routers
show security alg msrpc portmap
show security alg sunrpc portmap
The
show security alg msrpc object-id-map
node option to permit the output to be restricted to a particular node or to query
the entire cluster. The show security alg msrpc object-id-map node
options are <node-id | all | local | primary>
On SRX650 devices in chassis cluster mode, the T1/E1 PIC goes offline and does
not come online.
The automatic pause timer functionality related to IP address monitoring for
redundancy groups has been removed. Instead, a configurable
timer for all redundancy groups has been instituted. See the "Configuring a
Dampening Time Between Back-to-Back Redundancy Group Failovers" section
of the JUNOS Software Security Configuration Guide.
IP address monitoring on redundancy group 0 is now supported.
The
chassis cluster redundancy-group group-number ip-monitoring threshold
command has been removed. Instead, use the
group-number ip-monitoring global-threshold
IP address monitoring on virtual routers is now supported.
CLI command has a chassis cluster
CLI command
.
hold-down-interval
chassis cluster redundancy-group
command.
CLI