Juniper JUNOS 10.1 - RELEASE NOTES REV 4 Release Note page 35

New Features in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers
level), the and
pap chap
configuration options, including the
interfaces are supported only on PPPoE interfaces (
release.
To configure CHAP or PAP authentication for static interfaces, use the following
stanza:
[edit interfaces interface-name unit logical-unit-number]
ppp-options {
chap {
access-profile name;
default-chap-secret name;
local-name name;
passive;
}
pap {
access-profile name
default-pap-password password;
local-name name;
local-password password;
passive;
}
}
To configure CHAP or PAP authentication for dynamic interfaces, use the following
stanza:
[edit dynamic-profiles profile-name interfaces pp0 unit $junos-interface-unit]
ppp-options {
chap;
pap;
}
[Subscriber Access, Network Interfaces]
Support for input and output filters on the Trio MPC/MIC interfaces on MX
Series routers Enables you to apply input and output filters to logical interfaces
that are running over the Trio MPC/MIC interfaces on MX Series routers.
To apply input and output filters for logical interfaces, include the
input-filter-name and output output-filter-name
statically, include the statements at the
logical-unit-number filter] hierarchy level. To apply these filters dynamically, include
the statements at the
[edit dynamic-profiles profile-name interfaces interface-name
unit "$junos-interface-unit" filter]
create filters, see the Policy Framework Configuration Guide.
[Subscriber Access, Network Interfaces, Policy Framework]
PPPoE interface support for subscriber secure policy traffic mirroring on Trio
MPC/MIC interfaces on MX Series routers Enables you to configure subscriber
secure policy traffic mirroring to provide RADIUS-initiated mirroring for
subscribers on PPPoE interfaces that are running over Trio MPC/MIC interfaces
on MX Series routers.
New Features in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers
statements do not support any additional
passive statement. PPP dynamic
statements. To apply these filters
[edit interfaces interface-name unit
hierarchy level. For information about how to
) for this
interface pp0
input
35