Juniper JUNOS 10.1 - RELEASE NOTES REV 4 Release Note page 97

Errata and Changes in Documentation for JUNOS Software Release 10.1 for M Series, MX Series, and T Series Routers
User Interface and Configuration
VPNs
Related Topics
Errata and Changes in Documentation for JUNOS Software Release 10.1 for M Series, MX Series, and T Series Routers
The show system statistics bridge
Series routers. [System Basics Command Reference]
The mac-tlv-receive and mac-tlv-send
of the JUNOS Software and are no longer visible in the
logical-system-name routing-instances routing-instance-name protocols vpls]
[edit routing-instances routing-instance-name protocols vpls]
Although the mac-tlv-receive
current release, they will be removed in a future release. We recommend that
you update your configurations and use the
the Changes in Default Behavior and Syntax in JUNOS Release 10.1 for M Series,
MX Series, and T Series Routers section of the release notes.
[VPNs]
The JUNOS Software substantially supports the following RFCs for Layer 2 circuits,
as well as the Internet drafts listed in the published documentation:
RFC 4447, Pseudowire Setup and Maintenance Using the Label Distribution
Protocol (LDP)
The JUNOS Software does not support Section 5.3, "The Generalized PWid
FEC Element."
RFC 4448, Encapsulation Methods for Transport of Ethernet over MPLS
Networks
[Hierarchy and Standards Reference]
In Chapter 19 Configuring VPLS of the VPNs Configuration Guide, an incorrect
statement that caused contradictory information about which platforms support
LDP BGP interworking has been removed. The M7i router was also omitted from
the list of supported platforms. The M7i router does support LDP BGP
interworking.
[VPNs]
New Features in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers
on page 6
Changes in Default Behavior and Syntax in JUNOS Release 10.1 for M Series,
MX Series, and T Series Routers on page 42
Issues in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers on
page 54
Upgrade and Downgrade Instructions for JUNOS Release 10.1 for M Series, MX
Series, and T Series Routers on page 98
command displays system statistics on MX
statements were removed from Release 10.0
and mac-tlv-send statements are recognized in the
mac-flush
[edit logical-systems
and
hierarchy levels.
statement described in
97