Juniper JUNOS 10.1 - RELEASE NOTES REV 4 Release Note page 30

JUNOS 10.1 Software Release Notes
Dynamic Profile Variable
$junos-framed-route-ipv6-address-prefix
$junos-framed-route-ipv6-nexthop
$junos-input-ipv6-filter
$junos-ipv6-ndra-prefix
$junos-output-ipv6-filter
$junos-preferred-source-ipv6-address
$junos-subscriber-ipv6-address
Attribute Number
97
99
26-106
26-107
30
New Features in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers
To enable IPv6 addressing for a static VLAN subscriber interface, include the
statement at the
family inet6
interface-name unit logical-unit-number]
To enable IPv6 addressing for a demux subscriber interface, include the
inet6 statement at the [edit dynamic profiles profile-name interfaces demux0]
hierarchy level. To enable an IPv6 source address for the interface, specify the
new
$junos-subscriber-ipv6 address
statement at the [edit dynamic profiles profile-name interfaces demux0 unit
$junos-interface-unit family inet6]
supplied to the interface by DHCP when the subscriber logs in.
This feature enables you to configure dynamic, classic, and fast update firewall
filters for IPv6 families. In addition, you can configure aggregate CoS when IPv4
and IPv6 families share a logical interface, and per-family CoS when IPv4 and
IPv6 families do not share a logical interface (such as a demux interface).
The following new predefined variables have been added to implement IPv6
addressing for subscriber services:
Definition
Route prefix of an IPv6 access route.
Next-hop address of an IPv6 access route.
Attaches a filter based on RADIUS VSA 26-106 (IPv6-Ingress-Policy-Name)
to the interface.
IPv6 prefix value used when configuring the Router Advertisement
protocol.
Attaches a filter based on RADIUS VSA 26-107 (IPv6-Egress-Policy-Name)
to the interface.
Selects the preferred IPv6 source address associated with the loopback
address used for the subscriber.
IPv6 address of the subscriber.
RADIUS supports activation, deactivation, and change of authorization (CoA) for
IPv6 services. The following new RADIUS attributes and VSAs have been added
to implement IPv6 addressing for subscriber services:
Attribute Name
Framed-IPv6-Prefix
Framed-IPv6-Route
IPv6-Ingress-Policy-Name
IPv6-Egress-Policy-Name
[edit dynamic profiles profile-name interfaces
hierarchy level.
predefined variable with the
hierarchy level. The values for this variable are
family
demux-source