Juniper JUNOS 10.1 - RELEASE NOTES REV 4 Release Note page 118

JUNOS 10.1 Software Release Notes
NOTE: Note that this package should be of the same version as that of the
corresponding JUNOS, example, on a device with a 10.2 JUNOS package installed,
the jloader-srxsme package should also be of version 10.2.
NOTE: Installing the jloader-srxsme package puts the necessary images under
directory/boot.
2.
3.
118
New Features in JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services Routers
Install the package using the
2.
jloader-srxsme package> no-copy no-validate
root> request system software add /var/tmp/jloader-srxsme-10.2B3-signed.tgz
no-copy no-validate
Installing package '/var/tmp/jloader-srxsme-10.2B3-signed.tgz' ...
Verified jloader-srxsme-10.2B3.tgz signed by PackageProduction_10_2_0
Adding jloader-srxsme...
Available space: 427640 require: 2674
Mounted jloader-srxsme package on /dev/md5...
Saving state for rollback ...
root> show version
Model: srx240h
JUNOS Software Release [10.2B3]
JUNOS BIOS Software Suite [10.2B3]
Verifying that images for upgrade are installed
The
show system firmware
available for upgrade. The available version is printed under column
. The user needs to verify that the correct version of BIOS images
version
available for upgrade.
root> show system firmware
Part Type
Routing Engine 0 RE BIOS
Routing Engine 0 RE BIOS Backup 1
Routing Engine 0 RE FPGA
BIOS upgrade
Active BIOS:
1. Initiate the upgrade using the
command.
root> request system firmware upgrade re bios
Part Type
request system software add <path to
command.
command can be used to get version of images
Tag Current Available
version
0 1.5
1.5
11 12.3.0
request system firmware upgade re bios
Tag Current Available
Available
Status
version
1.7 OK
1.7 OK
OK
Status