Juniper JUNOS 10.1 - RELEASE NOTES REV 4 Release Note page 156

JUNOS 10.1 Software Release Notes
156
Issues in JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services Routers
On SRX210, SRX240, and SRX650 devices, the complete contents of the ToolTips
are not displayed in the J-Web Chassis View. As a workaround, drag the Chassis
View image down to see the complete ToolTip. [PR/396016]
On SRX100, SRX210, SRX240, and SRX650 devices, the LED status in the Chassis
View is not in sync with the LED status on the device. [PR/397392]
On SRX Series devices, when you right-click Configure Interface on an interface
in the J-Web Chassis View, the Configure>Interfaces page for all interfaces is
displayed instead of the configuration page for the selected interface. [PR/405392]
On SRX210 Low Memory devices, in the rear view of the Chassis viewer image,
the image of ExpressCard remains the same whether a 3G card is present or
not. [PR/407916]
On SRX210, SRX3400, SRX3600, SRX5600, and SRX5800 devices, selecting
Configure>Security>Policy>IDP Policies>Security Package Update>Help
in the J-Web user interface brings up the IDP policy Help page instead of the
Signature update Help page. To access the corresponding Help page, select
Configure>IDP>Signature Update and then click Help. [PR/409127]
On SRX Series devices, the CLI Terminal feature does not work in J-Web over
IPv6. [PR/409939]
On SRX210 High Memory, SRX240 PoE, and J Series devices, IDP custom attacks
and dynamic attack groups cannot be configured using J-Web. [PR/416885]
On J2350, J4350, and J6350 devices, users cannot configure firewall filters using
J-Web. The Firewall Filters menu was removed because it was not functioning
properly. [PR/422898]
On SRX210, SRX240, J2350, J4350, and J6350 devices, when J-Web users select
the tabs on the bottom-left menu, the corresponding screen is not displayed
fully, so users must scroll the page to see all the content. This issue occurs when
the computer is set to a low resolution. As a workaround, set the computer
resolution to 1280 x 1024. [PR/423555]
On SRX Series and J Series devices, users cannot differentiate between Active
and Inactive configurations on the System Identity, Management Access, User
Management, and Date & Time pages. [PR/433353]
On SRX210 device, in Chassis View, right-clicking any port and then clicking
Configure Port takes the user to the Link aggregation page. [PR/433623]
On SRX100 devices, in J-Web users can configure the scheduler without entering
any stop date. The device submits the scheduler successfully, but the submitted
value is not displayed on the screen or saved in the device. [PR/439636]
On SRX100, SRX210, SRX240, and SRX650 devices, in J-Web the associated
dscp and dscpv6 classifiers for a logical interface might not be mapped properly
when the user edits the classifiers of a logical interface. This can affect the Delete
functionality as well. [PR/455670]
On SRX Series and J Series devices, when J-Web is used to configure a VLAN,
the option to add an IPv6 address appears. Only IPv4 addresses are supported.
[PR/459530]
On SRX100, SRX210, SRX240, SRX650, and J Series devices, in J-Web, the
options Input filter and Output Filter are displayed in VLAN configuration page.