Juniper JUNOS 10.1 - RELEASE NOTES REV 4 Release Note page 171

Errata and Changes in Documentation for JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services Routers
Syntax:
user@host#
Possible completions: < download-timeout >
Maximum time for download to complete (1 - 60 minutes)
[edit]
user@host#
Range: 1 – 60 minutes
Default: 1 minute
The JUNOS Software CLI Reference incorrectly states the
and
The IDP rule notification options listed in the JUNOS Software Security
Configuration Guide incorrectly include the
which are not supported in JUNOS Release 10.1.
Errata and Changes in Documentation for JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services
set security idp security-package automatic download-timeout ?
set security idp security-package automatic download-timeout
logs, whereas the logs should be as follows:
clear security idp status
Correct
show security idp status
user@host> show security idp status
State of IDP: 2-default, Up since: 2010-02-04 13:37:16 UTC (17:15:02 ago)
Packets/second: 5 Peak: 11 @ 2010-02-05 06:51:58 UTC
KBits/second : 2 Peak: 5 @ 2010-02-05 06:52:06 UTC
Latency (microseconds): [min: 0] [max: 0] [avg: 0]
Packet Statistics:
[ICMP: 0] [TCP: 82] [UDP: 0] [Other: 0]
Flow Statistics: ICMP: [Current: 0] [Max: 0 @ 2010-02-05 06:49:51 UTC]
TCP: [Current: 2] [Max: 6 @ 2010-02-05 06:52:08 UTC]
UDP: [Current: 0] [Max: 0 @ 2010-02-05 06:49:51 UTC]
Other: [Current: 0] [Max: 0 @ 2010-02-05 06:49:51 UTC]
Session Statistics: [ICMP: 0] [TCP: 1] [UDP: 0] [Other: 0]
Policy Name : sample
Running Detector Version : 10.2.160091104
Correct
clear security idp status
user@host> clear security idp status
State of IDP: 2-default, Up since: 2010-02-04 13:37:16 UTC (17:13:45 ago)
Packets/second: 0 Peak: 0 @ 2010-02-05 06:49:51 UTC
KBits/second: 0 Peak: 0 @ 2010-02-05 06:49:51 UTC
Latency (microseconds): [min: 0] [max: 0] [avg: 0]
Packet Statistics: [ICMP: 0] [TCP: 0] [UDP: 0] [Other: 0]
Flow Statistics: ICMP: [Current: 0] [Max: 0 @ 2010-02-05 06:49:51 UTC]
TCP: [Current: 0] [Max: 0 @ 2010-02-05 06:49:51 UTC]
UDP: [Current: 0] [Max: 0 @ 2010-02-05 06:49:51 UTC]
Other: [Current: 0] [Max: 0 @ 2010-02-05 06:49:51 UTC]
Session Statistics: [ICMP: 0] [TCP: 0] [UDP: 0] [Other: 0]
Policy Name: sample
Running Detector Version: 10.2.160091104
The Verifying the Policy Compilation and Load Status section of the JUNOS
Software Security Configuration Guide has a missing empty/new line before
the heading, in the second sample output.
IDPD Trace file
The JUNOS Software Security Configuration Guide incorrectly states that IDP
is not supported in transparent mode on SRX3400, SRX3600, SRX5600, and
SRX5800 devices. IDP is supported in transparent mode on those devices.
show security idp status
log
log
Send Emails and Run Scripts options,
171
Routers