Eap-Tls Authentication Error Messages - Cisco AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter Installation And Configuration Manual

Error Messages
Error Message You must select a PAC Authority when using manual PAC provisioning.
Recommended Action
drop-down list. If the list is empty, import a PAC file.
Error Message You must specify an SSID for Ad Hoc mode.
Explanation
SSID was blank.
Recommended Action

EAP-TLS Authentication Error Messages

This section lists error messages that may occur during EAP-TLS authentication.
Error Message Certificate enrollment failed.
Explanation
Recommended Action
on the Certificate Enrollment screen and tap the Enroll button. If the second attempt also fails, try to
import a new certificate.
Error Message The certificate server was not found.
Explanation
Recommended Action
on the Certificate Enrollment screen and tap the Enroll button. If the second attempt also fails, enter
your credentials for a different certificate server on your network.
Error Message The object or property already exists.
Explanation
Recommended Action
Error Message Unable to configure connection settings.
Explanation
Recommended Action
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
9-14
Explanation You tapped OK on the Properties screen when automatic provisioning was disabled and
no PAC authority was selected.
Either enable automatic provisioning or select a PAC authority from the
You tapped OK on the Properties screen when Infrastructure Mode was set to No and the
Enter an SSID or set the Infrastructure Mode to Yes.
Your attempt to import a user certificate failed.
Re-enter your username, password, and server name for your certificate server
A certificate server could not be found during certificate enrollment.
Re-enter your username, password, and server name for your certificate server
An attempt was made to import a certificate file that was already installed.
Tap OK and select a different certificate to import.
An error occurred after you tapped the Connect button on the Authentication screen.
Reset the Windows CE device and try the operation again.
Chapter 9 Troubleshooting
OL-1375-04