Chapter 6
Using EAP Authentication
Figure 6-4
Enter your PEAP username and password (which are registered with the RADIUS server) in the
Step 5
appropriate fields.
If applicable, enter your domain name in the Domain field.
Step 6
Note
Tap OK. The client adapter should now EAP authenticate.
Step 7
To verify authentication on a PPC 2002 device, select Start > Programs > Cisco > AuthMgr. The Status
field at the bottom of the screen shows the authentication status. If the authentication is successful, the
Status field displays Authenticated, and the IP Address field displays the IP address of the client adapter.
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
OL-1375-04
Static Password Screen
A domain name is not required for OTP databases.
Using PEAP
6-7