Using Eap-Tls - Cisco AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter Installation And Configuration Manual

Chapter 6 Using EAP Authentication

Using EAP-TLS

After you select a profile that uses host-based EAP authentication and configure the card for EAP-TLS,
follow these steps to EAP authenticate.
These instructions are applicable after profile selection, card ejection and reinsertion, or reset.
Note
Step 1 If a message appears informing you that you need to accept a certificate to begin the EAP authentication
process, tap the message and follow the instructions provided to accept the certificate.
Note
Step 2 If a message appears indicating the root certification authority for the server's certificate and it is the
correct certification authority, tap OK to accept the connection. Otherwise, tap Cancel.
Step 3 If a message appears indicating the server to which your client adapter is connected and it is the correct
server to connect to, tap OK to accept the connection. Otherwise, tap Cancel.
Step 4 The User Logon screen appears (see
Figure 6-3
Enter your EAP-TLS username and optional domain name (which are registered with the RADIUS
Step 5
server) in the appropriate fields. For example, if your EAP-TLS username is jsmith and the domain name
is corporate, you would enter jsmith in the User Name field and corporate in the Domain field.
OL-1375-04
You should not have to accept a certificate for future authentication attempts. After you accept
one, the same certificate is used subsequently.
User Logon Screen
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
Figure 6-3).
Using EAP-TLS
6-5