Obtaining A Pac File (Manual Pac Provisioning Only); Enabling Eap-Fast - Cisco AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter Installation And Configuration Manual

Enabling EAP-FAST

Obtaining a PAC File (Manual PAC Provisioning Only)

If you are planning to enable manual PAC provisioning for this EAP-FAST profile, you must obtain a
PAC file before you can import it for use on your Windows CE device. Follow these steps if you have
not yet obtained a PAC file.
Obtain the PAC file (*.pac) from your system administrator.
Step 1
Establish an ActiveSync connection between your laptop or PC and your Windows CE device.
Step 2
Step 3 Use Windows Explorer to copy the PAC file and paste it into a folder under My Computer > Mobile
Device.
Note
Step 4 Follow the steps in the
CE device.
Enabling EAP-FAST
Follow these steps to enable EAP-FAST authentication for this profile.
From the Properties screen, select Network Security Type under Property and EAP-FAST from the list
Step 1
of options in the Value box. When EAP-FAST is enabled, the following parameters on the Properties
screen are changed automatically:
•
•
Perform one of the following:
Step 2
•
•
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
5-22
For PPC devices, the destination must be either the Business or Personal folder.
"Enabling EAP-FAST"
WEP is set to Dynamic WEP Keys.
Authentication Type is set to Open.
If you want to use a temporary username and password (which must be entered whenever an
EAP-FAST profile is selected, the client adapter is ejected and reinserted, or the Windows CE device
is reset in order to authenticate and gain access to the network), go to
If you want to use a saved username and password (which do not need to be entered whenever an
EAP-FAST profile is selected, the client adapter is ejected and reinserted, or the Windows CE device
is reset because authentication occurs automatically as needed using your saved credentials), enter
your EAP-FAST username, password, and optional domain name in the User Name, User Password,
and User Domain edit boxes.
Usernames are limited to 64 ASCII characters, and passwords are limited to 32 ASCII
Note
characters. However, if a domain name is entered in the User Domain field, the sum of the
username and domain name is limited to 63 ASCII characters.
Chapter 5
section below to import the PAC file for your Windows
Configuring the Client Adapter
Step 3.
OL-1375-04