Cisco AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter Installation And Configuration Manual page 99

Chapter 8 Routine Procedures
Select Option #2: Aironet Wireless Software Display Tables.
Step 4
Note
Select Cisco Aironet Wireless LAN Client Adapters.
Step 5
Find the section for client adapter firmware.
Step 6
Select the link for your client adapter's series (for example, 350 Series).
Step 7
Select the latest firmware file for your client adapter.
Step 8
Complete the encryption authorization form; then read and accept the terms and conditions of the
Step 9
Software License Agreement.
Select the firmware file again to download it.
Step 10
Step 11 Save the file to a floppy disk or to the hard drive of your laptop or PC.
Step 12 Locate the file using Windows Explorer, double-click it, and extract the image file (*.img) to a folder.
In the ActiveSync window on the laptop or PC, click the Explore button to view the files on the Windows
Step 13
CE device.
Drag and drop the firmware image from Windows Explorer to a location in the ActiveSync window.
Step 14
Note
After the file is copied, disconnect the Windows CE device.
Step 15
Make sure the client adapter is installed in your Windows CE device and is operational.
Step 16
On your Windows CE device, open ACU and tap the Firmware tab. The Firmware screen appears (see
Step 17
Figure
Tap the Browse button. The Open window appears (see
Step 18
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
OL-1375-04
You can download software from the Software Selector tool instead of the display tables. To
do so, select Option #1: Aironet Wireless Software Selector, follow the instructions on the
screen, and go to Step 9.
If your Windows CE device is a PPC running Windows CE 3.0, you must copy the firmware
image to the My Documents folder or a folder under My Documents.
8-2).
Upgrading the Client Adapter Software
Figure 8-3).
8-5