Installation Error Messages - Cisco AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter Installation And Configuration Manual

Wireless lan client adapters for windows ce
Hide thumbs Also See for AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter:
Table of Contents

Advertisement

Chapter 9
Troubleshooting
Error Message WEP Key x must be 10 Hex digits!
Explanation
indicated. 40-bit keys must have 10 characters.
Recommended Action
invalid key.
Error Message WEP Key x must be 26 Hex digits!
Explanation
indicated. 128-bit keys must have 26 characters.
Recommended Action
invalid key.
Error Message You must enter a WEP Key!
Explanation
Recommended Action
screen and tap OK to save the WEP key settings or tap Cancel to exit the WEP Keys screen without
entering a WEP key.

Installation Error Messages

This section lists error messages that may appear during installation of the client adapter's software
components.
Error Message Cisco Aironet Wireless LAN Adapter does not support the connected
device type. Application Manager will make the application available for
installation when a supported device type is connected.
Explanation
adapter is being installed. Refer to the
Windows CE devices that are supported by the client adapter.
Recommended Action
install the client adapter's driver and client utilities on a supported Windows CE device, follow the
instructions in the
Error Message Could NOT find all of the appropriate files for this installation. Make
sure that all of the files are installed to the same directory.
Explanation
Recommended Action
to a folder, making sure that you keep all of the extracted files together in the one folder.
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
OL-1375-04
An invalid number of characters or an incorrect character was entered for the WEP key
Tap OK to acknowledge the message; then re-enter the characters for the
An invalid number of characters or an incorrect character was entered for the WEP key
Tap OK to acknowledge the message; then re-enter the characters for the
A WEP key was not entered on the WEP Keys screen.
Tap OK to acknowledge the message. Then enter a WEP key on the WEP Keys
The client adapter software does not support the Windows CE device on which the
Tap OK to acknowledge the message and terminate the installation process. To
"Installing the Driver and Client Utilities" section on page
Some of the client adapter installation files could not be found.
Download the WinCE-PCMCIA-LMC-v250.exe file again and extract its files
"System Requirements" section on page 2-4
Error Messages
for the list of
3-2.
9-7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aironet 350 series

Table of Contents