Appendix A
Technical Specifications
Table A-1
Radio Specifications
Type
Power output
Operating frequency
Usable channels
Interference rejection
Data rates
Modulation
Receiver sensitivity
Receiver delay spread
(multipath)
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
OL-1375-04
Technical Specifications for the 350 Series Client Adapters (continued)
Direct-sequence spread spectrum (DSSS)
IEEE 802.11b compliant
100 mW (20 dBm)
50 mW (17 dBm)
30 mW (15 dBm)
20 mW (13 dBm)
5 mW (7 dBm)
1 mW (0 dBm)
Refer to
Note
radiated power (EIRP) levels in the
European community and other countries.
If you are using an older version of a 350
Note
series client adapter, your power level
options may be different than those listed
here.
2.400 to 2.497 GHz (depending on the regulatory
domain in which the client adapter is used)
2412 to 2484 MHz in 5-MHz increments
–35 dB adjacent channel rejection
1, 2, 5.5, and 11 Mbps
Binary phase shift keying (BPSK) - 1 Mbps
Quaternary phase shift keying (QPSK) - 2 Mbps
Complementary code keying (CCK) - 5.5 and
11 Mbps
–94 dBm @ 1 Mbps
–91 dBm @ 2 Mbps
–89 dBm @ 5.5 Mbps
–85 dBm @ 11 Mbps
500 ns @ 1 Mbps
400 ns @ 2 Mbps
300 ns @ 5.5 Mbps
140 ns @ 11 Mbps
Appendix D
for limitations on
A-3