Cisco AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter Installation And Configuration Manual page 122

Wireless lan client adapters for windows ce
Hide thumbs Also See for AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter:
Table of Contents

Advertisement

Error Messages
Error Message The old password you supplied doesn't match what you entered
previously. Please try it again.
Explanation
match the password that was used previously.
Recommended Action
Error Message PEAP failed initialization. Please make sure that PEAP is installed
correctly and Trusted Root Certificate Authority certificate is installed
correctly.
Explanation
specified root certificate is missing from the system.
Recommended Action
installed correctly.
Error Message Unable to configure connection settings.
Explanation
Recommended Action
Error Message You have connected to a server that is signed by Root Certification
Authority xxx, which is different than the specified trusted CA. Do you want to
accept this connection? Warning: Connecting to a server signed with untrusted CA
might compromise your security.
Explanation
specified trusted CA.
Recommended Action
a security risk, tap Yes. Otherwise, tap No.
Error Message You have connected to server xxx. Do you want to accept the connection?
Warning: Connecting to an unsecured server might compromise your security.
Explanation
Recommended Action
a security risk, tap Yes. Otherwise, tap No.
Error Message You must enter a server name.
Explanation
screen.
Recommended Action
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
9-16
The password entered in the Old Password field on the Change Password screen does not
Re-enter your old password in the Old Password field.
The PEAP authentication process failed during initialization, most likely because the
Make sure that PEAP and the Trusted Root Certificate Authority certificate are
An error occurred after you tapped the Connect button on the Authentication screen.
Reset the Windows CE device and try the operation again.
The client adapter has established a connection to a certificate server other than the
If you want the client adapter to connect to this server although it may present
The client adapter has established a connection to the server specified.
If you want the client adapter to connect to this server although it may present
The server name for your certificate server was not entered on the Certificate Enrollment
Enter the server name for your certificate server. Then tap the Enroll button.
Chapter 9
Troubleshooting
OL-1375-04

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aironet 350 series

Table of Contents