Cisco AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter Installation And Configuration Manual page 54

Configuring Your Client Adapter
Table 5-1
Parameter
PAC Provisioning Mode
PAC Authority
Step 3 If you plan to use any of the security features (static WEP, LEAP, EAP-FAST, EAP-TLS, or PEAP), read
the "Overview of Security Features"
you want to activate.
Tap OK on the Properties screen to save any changes you have made. If the profile you just edited is the
Step 4
active profile and your client adapter is inserted, the changes are applied immediately.
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
5-10
Client Adapter Configuration Parameters (continued)
Description
Enables automatic or manual protected access credentials (PAC)
provisioning for this profile. This parameter is available only if the
Network Security Type is set to EAP-FAST.
Options: Automatic or Manual
Default: Automatic
PAC Provisioning Mode
Automatic
Manual
Note
Note
Note
Contains the names of all the PAC authorities from which a PAC has
previously been provisioned. If this profile is set for manual
provisioning, you must select a PAC authority or import a PAC file.
This parameter is available only if the Network Security Type is set to
EAP-FAST.
Note
section below and follow the instructions for the security feature
Description
Enables automatic PAC provisioning. A
PAC file is obtained automatically as
needed (for instance, when a PAC expires,
when the client adapter accesses a
different server, when the EAP-FAST
username cannot be matched to a
previously provisioned PAC, etc.).
Enables manual PAC provisioning. You
must select a PAC authority or manually
import a PAC file.
LDAP user databases support only manual PAC provisioning
while Cisco Secure ACS internal, Cisco Secure ODBC, and
Windows NT/2000/2003 domain user databases support both
automatic and manual PAC provisioning.
Provisioning occurs only upon initial negotiation of the PAC or
upon PAC expiration. After the PAC is provisioned, it serves as
the key by which authentication transactions are secured.
Go to Step 3 for instructions on enabling automatic PAC
provisioning or manually importing a PAC file.
Go to Step 3 for instructions on selecting a PAC authority.
Chapter 5 Configuring the Client Adapter
OL-1375-04