Table of Contents
Advertisement
Chapter 4
Configuring the PA-POS-2OC3
•
•
•
•
PA-POS-2OC3 Error Messages
The only error message you should see is of the following type and format:
%POS-0-MSG:%DEBUGGER-0-STACK_DATA8: 00E0
80032CD4 00000000 00000000
Note
Contact the Cisco Technical Assistance Center (TAC) for assistance with this error message.
OL-3028-06
CRC errors—Packet corrupted in reception
Giants received—Packet length too large (greater than 16 KB)
Runts—Packet length too small (less than or equal to 4 bytes)
Ignores—No receive buffers available; receive buffers full
PA-POS-2OC3 Two-Port Packet-over-SONET Port Adapter Installation and Configuration
FFFFFFFF 80057F50 00000000 00000000
PA-POS-2OC3 Error Messages
FFFFFFFF
4-31
Advertisement
Table of Contents
