Eap-Fast Authentication Error Messages - Cisco AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter Installation And Configuration Manual

Error Messages

EAP-FAST Authentication Error Messages

This section lists error messages that may occur during EAP-FAST authentication.
Error Message Authentication Attempt Timed Out. Rerun WLM and try again.
Explanation
Recommended Action
authenticate again.
Error Message Can't validate PAC! Either retry your credentials, change the PAC with
the ACU or auto-provision a new PAC (if it is enabled to do so in the ACU).
Explanation
configured for automatic or manual provisioning (for example, a PAC authority was not selected for
manual provisioning).
Recommended Action
Error Message Current PAC doesn't match the server you are trying to authenticate
to. There is one available that does match the server, would you like to try to
authenticate with it?
Explanation
authenticate, but another PAC is available to try.
Recommended Action
Cancel to cancel the operation. If you tap Cancel, the client adapter is unable to authenticate using
the existing profile.
Error Message Error Changing Password!!!!
Explanation
Recommended Action
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
9-10
The client adapter was unable to authenticate within a specified amount of time.
Tap OK. Then open WLM, enter your EAP-FAST credentials, and try to
Either your username or password was entered incorrectly or the profile is not properly
Perform one of the following:
Tap Retry to attempt to authenticate again using your current username and password.
–
– Tap Auto-Provision to automatically provision a new PAC if the profile is set for automatic
provisioning. After a new PAC is provisioned, the client adapter tries again to authenticate. If a
message appears indicating that your password has expired, follow the instructions in the
Your EAP-FAST Credentials Expire" section on page 6-4
Tap Cancel to acknowledge the message. Then select a different PAC authority or import a new
–
PAC file in ACU and try again to authenticate.
The current PAC does not match the server to which the client adapter is attempting to
Tap OK to attempt to authenticate using the PAC that matches the server or tap
An error occurred when you attempted to change your EAP-FAST password.
Re-enter your password on the Password Expired screen.
Chapter 9 Troubleshooting
to change your password.
OL-1375-04
"After